Highly Energy Efficient

Although a new POLYURETHANE SPRAY FOAM ROOFING (PSFR) is strictly a roofing product made for flat and low slope roofs, the bonus is it offers an extremely high R value Which is valuable in older roofs that lack insulation or just add more to the existing insulation . On our yearly inspections we are always told about the energy savings from the air conditioning.

Easy Maintenance

After the roof is first completed, there is a U.V protectant coating is applied over the Foam. All what this does is protect it from the suns UV rays. In approximately 20 years another U.V coating should be applied. This coating should be very reasonably priced as you are just top coating and freshening up the old U.V coating. As any Roof, you should have a yearly inspection. If for some reason the roof got damaged like a tree branch, We can prep the area, Spray Patch and Apply the UV protectant coating over the area patched, Problem Solved! It’s a 100% seamless roof again!

Applied right over an existing roof!

A 3lb POLYURETHANE SPRAY FOAM ROOF ( PSFR ) can be applied over most existing materials on flat or low slow roofs. Unfortunately some roofs do get that bad that a tear off is required. 90% of the time with proper preparation like stone removal, cleaning and primer undercoatings, you can save yourself thousands $$ of dollars, easily 40%-60% of the cost of a tear off by applying a brand new 3lb POLYURETHANE SPRAY FOAM ROOF ( PSFR ) right over the existing substrate with the same long lasting results.

Completely Waterproof and Seamless

Cracks, penetrations, and seams are the primary source of leaks in a roof. A 3lb POLYURETHANE SPRAY FOAM ROOF ( PSFR ) fills all cracks, penetrations and open seams. Applied In a liquid and expanded  approximately to 1 1/2 to 2 inches thick ( Or a lot thicker, when and where needed ) and even thicker around all edges, corners and Vent bottoms, Will give you a 100% SEAMLESS and WATERPROOF roofing system that will last for years!